Dogtra 1800 Series Bedienungsanleitung PDF herunterladen (Seite 14)

25

TESTING

1. Turn the collar on by pressing the button on

the back side of the collar receiver. The

indicator light will come on for a moment

then blink once every two seconds, showing

that the collar is ready to use. (If the

indicator light is red, the batteries need to be

charged.) Place the test light on the contact

points of receiver and hold it there.

TESTING YOUR

COLLAR

24

CHARGING THE BATTERIES

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on

page 22.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger,

plug into a cigarette lighter. (Use a 230-

volt European charger for Europe.) When

properly plugged in, all indicator lights

should glow red.

The receiver automatically turns off when

you insert the charging cable into the

battery charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the

transmitter and receiver.

4. The battery is fully charged with a 10-hour

charge. The lights will stay red during the

charging process. They DO NOT turn

green when fully charged. Charging the

batteries for more than 10 hours at one time

will not extend battery life.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare